CV series products are the analog composite video input driver boards for SVGA Series OLED microdisplays. The low power consumption decoder can automatically detects and converts standard analog baseband television signals compatible with worldwide NTSC, PAL, and SECAM standards into digital ITU-R BT656 8 Bit 4: 2: 2 component video data compatible with the 8-bit ITU-R BT 656 interface standard. Default driver board setting is PAL input, and the resolution is 768x576, support mono or color signal. The display center is accord to the driver PCB The several digital input pins allow user to adjust th brightness, and contrast of the display. One CMOS standard serial communication interface allow user to configure all register of the decoder and display. So user can re-configure the driver board flexible. Besides, DRV050-CV-R03. DRV060-CV-R03 and R03 driver boards can support 5.5~17V(Compatible with DRV097-CV-5V)wide power input by using efficient low-noise, low-dropout DC/Dc convertor; and DRVO60-CV-GAD-R03 can support 5V~5.2V power input by using high precision low-noise, low-dropout linear regulators

Technical Parameters

Mechanical Size(mm ² ) : 20 × 15

Input Video Signal : PAL,NTSC,SECAM

Output Video Format : Digital 8-bit 4:2:2 YCbCr(ITU-R BT.656)

Control Interface : USART(RS-232) Receive Only

Operating Temperature : -40℃ ~ +65℃

Input Voltage : 5V DC

Power Consumption : ≤ 500mW (including microdisplay)

Weight(g) : ≤ 2.1